Discontinued orchard heater - standard propane model
Eliminate the risk to the environment by replacing each old oil filled unit with this newer design of orchard heater.
Uses just a fraction of a pound of propane while operating on standby and can generate between 22,000 and 155,000 BTU when heating using just from 1 lb of fuel per hour.
Wind resistant easy access nozzle and 6 inch stainless steel nipple make this the orchard heater of choice for the modern market.
Spare parts available include, replacement burners and legs.
Custom punching available at the factory or in the field. Call for specifics toll free 877 266 3532.
Specific instructions as to how to use these heaters vary according to size of acreage, location, wind drift, temperatures, topography, and crop type. From 35 to 60 heaters per acre is the general recommendation for most citrus and deciduous orchard crops, however, fewer heaters are required if they are used in conjunction with an Orchard-Rite wind machine to provide frost protection for larger blocks. In this application, from 12 to 15 HY-LO heaters per acre are used in a border arrangement around the wind machine with the heaters providing supplementary heat while at the same time the wind machine pulls warmer air down into the area and circulates the heated air throughout the block.
Minimum order 50 pieces.
Discontinued - sorry
|
Wind resistant
Stainless steel nipple
Detachable leg
Operates on a fraction of a pound while on standby
Hose not included
No soot
22,000 - 155,000 BTU
Electrical power required: none
Weight: 20 lbs
|
