Natural gas heater from Enerco/Mr Heater. Easily add warm and efficient vent free heat to your house. This size works for areas up to 300 sq ft, we have larger sizes if you need it. This is the MHVFR10NG
Operates without electricity during power outages - as this Natural gas heater requires no electrical power.
Easy to install. Tools required: phillips screwdriver and pipe wrench. Feet kit (shown in picture) and wall mount bracket options are both included with the heater.
Safety is an important factor with any heat source and this Natural gas heater, has a built-in low oxygen shut-off sensor (ODS system) that shuts the unit down if it ever detects a possible problem.
Too large (by building code) for use in bathrooms. Not certified for use in recreational vehicles
The ignition system is battery powered. Simply unscrew the ignitor button to insert the battery.
In stock - can ship today (Mon-Fri)
$119 each
Add item(s) to shopping cart to view shipping speeds/costs
Q. What's the difference between the red flame and the blue flame models ?
Blue flame heats air molecules, and tries to heat the entire room to a fairly uniform temperature so somebody sitting 10 ft from the heater should be about the same temperature as someone sitting 5 ft from it. Infrared heat heats objects rather than air, it is like a fire, the closer you sit the warmer you are. Infrared is a good choice for drafty rooms, rooms lacking good insulation or suffer frequent opening of exterior doors, and/or have soaring ceilings.
Q. Does it have a thermostat ?
No.
Q. Can I install a blower ?
No, this heater is physically too small to fit one.
Q. Do all bricks glow all the time ?
No, One brick glows on low and two bricks glow on the high setting.
